ArtDio IPC 1000 Series Manual Do Utilizador

 

 

 

   

13

Public IP address 

IP address 

Subnet mask 

It is recommended that you obtain an IP address from 
MIS staff in order to prevent an IP conflict. 

Static IP 

Private IP address 

IP address 
Subnet mask 
Default Gateway 
It is recommended that you obtain an IP address from 
MIS staff in order to prevent an IP conflict.   
 
Note：Your private IP requires an IP sharing device, and 
this device must be configured to treat the IPP unit, and 
the IP it is using as a ‘virtual server’. 

Dynamic IP Address (DHCP) 

DHCP Mode 

PPPoE 

Account Number 
Password 
This information is normally provided by your ISP . If 
you don’t have this information, contact your ISP. 

 
 

The IP address can be set via the console, or the Web Management Page. 

 

  To use the console, use the following procedure： 

IPP >enable 
IPP #configure 
Enter configuration commands, one per line.    End with CNTL/Z 
IPP (config)#ip state user 
IPP (config)#ip address 210.62.149.250 255.255.255.128 
System needs to restart 
IPP (config)#ip default-gateway 210.62.149.254 
IPP (config)#exit 
IPP #restart 
This command resets the system.    System will restart operation code agent. 
Reset system, [Y]es or [N]o? Yes