Ariens 946101-ST622 Manual Do Utilizador

GB - 7

• Box knife to cut carton

1. Cut off top of box.
2. Remove packing material.
3. Remove literature pack, safety glasses 

and bottle of oil from box.

4. Cut out back of box and pull the unit out.
5. Remove protective packaging materials 

from trimming head and around unit.

1. Loosen handlebar wing knobs. Do not 

remove them.

2. Unfold handlebar to operating position.

NOTE: Adjust handlebar to a height 
comfortable for the operator. Be sure cable is 
clear of pinch points. Refer to Handlebars in 
Service and Adjustments.

3. Tighten handlebar wing knobs to secure 

upper handlebar.

Fill engine crankcase with proper amount and 
viscosity of oil. Refer to Engine Manual for 
specific information.

Please complete the following checklist before 
proceeding:

• All assembly instructions have been 

completed.

• No remaining loose parts in carton.
• Handlebar is adjusted comfortably and 

tightened securely.

• Trimming line is fastened securely in 

holder.

• Fuel tank is filled with proper fuel.
• Engine crankcase is filled with oil.
• Become familiar with all controls – their 

location and function. Operate them 
before you start the engine.

WARNING: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding. 

1. Lower Handle 

Bar

2. Upper Handle 

Bar

3. Carriage Bolt

4. Wing Knobs
5. Bolt Holes
6. Control Bail

OX0013

4

3

1

6

2

5

4