Apollo ESP6000 Manual Do Utilizador

 

ECM-3612 User’s Manual 

 

77

This section describes configuring the PCI bus system. PCI, or Personal Computer 

nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed 

the CPU itself uses when communicating with its own special components. This section 
covers some very technical items and it is strongly recommended that only experienced 
users should make any changes to the default settings. 

 

The operation system environment is Plug-and-Play aware sets “YES”. 
The choices: Yes, No. 

Normally, you leave this field Disabled. Select Enabled to reset Extended System 
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the 
system reconfiguration has caused such a serious conflict that the operating system cannot 
boot. 
The choices: Enabled, Disabled. 

The Award Plug and Play BIOS has the capacity to automatically configure all of the boot 
and Plug and Play compatible devices. However, this capability means absolutely nothing 
unless you are using a Plug and Play operating system such as Windows

®95. If you set 

this field to “manual” choose specific resources by going into each of the sub menu that 
follows this field (a sub menu is preceded by a “¾”). 
The choices: Auto(ESCD), Manual. 

Leave this field at Disabled. 
The choices: Enabled, Disabled.