Apex Digital 5708009-C Manual Do Utilizador
5708009-C
4-45
Apex 1 to 5.5 kW Generator
COMMAND SET FOR THE RS-232, AE BUS HOST PORT
Table 4-6 lists the command set for the RS-232, AE Bus Host port.
51
Duty cycle out of range
52
Minimum on/off time violated (on/off
time must be
time must be
≥ 10 µs).
99
Command not implemented
Table 4-5. CSR Codes for RS-232, AE Bus Host
Table 4-6. Host Port Commands for RS-232 with AE Bus
Command
Description
Number of
Host Data
Bytes
Number of
Response
Data Bytes
1
RF off
Requests RF output off; request is always
honored regardless of which interface has
control. (Readback command is 162.)
honored regardless of which interface has
control. (Readback command is 162.)
0
1
2
RF on
Requests RF output on; host control must
have been selected.
have been selected.
0
1
3
regulation
select
Sets the method of output regulation (forward
power (6), load (7), and ext. (8)). (Readback
command is 164.)
power (6), load (7), and ext. (8)). (Readback
command is 164.)
1 data byte
8-bit value
1
4
fwd pwr
limit
Specifies maximum forward power that can
be delivered; accepts a value of 0 to 8000 W
(for the 8 kW option) or 0 to 10000 W (for
the 10 kW option). (Readback command is
169.)
be delivered; accepts a value of 0 to 8000 W
(for the 8 kW option) or 0 to 10000 W (for
the 10 kW option). (Readback command is
169.)
2 data bytes
16-bit value
16-bit value
1
5
refl pwr
limit
Specifies maximum reflected power that can
be tolerated; accepts a value of 0 to 2000 W.
(Readback command is 170.)
be tolerated; accepts a value of 0 to 2000 W.
(Readback command is 170.)
2 data bytes
16-bit value
16-bit value
1
6
ext
feedback
limit
Specifies the maximum external feedback
level; accepts a value from 0 to the maximum
external feedback value. (Readback
command is 171.)
level; accepts a value from 0 to the maximum
external feedback value. (Readback
command is 171.)
Note: This command sets the value at which
the setpoint is limited during external
regulation
regulation
2 data bytes
16-bit value
16-bit value
1