Alvarion BREEZEACCESS SW VERSION 5.1 Manual Do Utilizador

 

Installing the SU-I 

Installation 

 

Connect the RF cable supplied with the antenna to the SMA jack located on 

the unit’s front panel. Install the antenna using the instructions provided in 
Section 

2.5.5

 on page 57, and connect to it the other end of the RF cable. Do 

not over-tighten the SMA connectors. 

If parameters are not pre-configured, configure the basic parameters as 

described in Section 3.1. 

Align the antenna as described in Section 3.3. 

Connect the 10/100 Base-T Ethernet connector to the data equipment. The 

cable connection should be a crossed Ethernet if connecting to a hub/switch 
and a straight cable if connecting directly to a PC Network Interface Card 
(NIC). 

Verify proper operation of the Ethernet link (see Table 2-5 for the Ethernet 

activity LED indication). To verify data connectivity from the end-user's PC or 
from a portable PC connected to the unit, ping a known device in the network, 
or try connecting to the Internet. 

2.5.5  Installing the Detached Antenna 

The detached antenna kit includes the following components: 

„ 

ALA04-200160 panel antenna 

„ 

2 meter SMA-SMA (M/M) RF cable 

„ 

Simple wall mounting kit, enabling installation on a wall (without any 

capability for adjusting the direction). For installation instructions see 
Section 

0

. 

„ 

Wall mounting kit with rotation capability, enabling installation on a wall with 

capability for adjusting the direction. For installation instructions see Section

 

2.5.5.2

. 

„ 

Simple window mounting accessories, enabling installation on a glass window 

(without any capability for adjusting the direction). For installation 
instructions see Section 

2.5.5.3

. 

„ 

Window mounting kit with rotation capability, enabling installation on a glass 

window (with rotation capability for adjusting the direction). For installation 
instructions see Section 

2.5.5.4

.