Alvarion BREEZENET BU-DS.11 Manual Do Utilizador

 

 

 

3-5 

In order to see the unit after assigning the IP address, the PC with the Configuration utility should be on 
the same IP subnet as the assigned IP address. 
Units receive auto IP address if there is no DHCP server and the unit is configured to work in the Smart 
mode. The IP address will be chosen randomly in the 169.254.x.x range with a subnet mask of 
255.255.0.0. 

Application Control Buttons 

The following buttons always appear at the bottom of the Configuration Utility 
window. Additional buttons, specific to certain tabs, are explained when relevant. 

♦  Hide to Tray: Minimizes the application into the 

 icon, placed in the 

Windows task bar (at the bottom of the Windows desktop). To restore the 
application, click the 

 icon. 

♦  Apply: Implements any changes you made. 
♦  Refresh: Refreshes the window with the most recent data from the unit. 
♦  Cancel: Closes the window without implementing any changes you made. 

Configuration Utility Tabs 

The following sections describe the tabs and parameters provided by the 
Configuration Utility in Unit Configuration mode. 

Station Status Tab 

The Station Status tab displays general information regarding the unit's firmware 
and hardware versions as well as general unit address information. 

 

The Station Status tab is comprised of the following components: 
♦  System Name: The name of the selected unit.