Alto Professional Music Mixer L-6 Manual Do Utilizador
- 24 BIT DIGITAL EFFECTS
Adjust this knob to select the right effect you wish
to perform. There are total 16 options for you:
Vibraflange, Funky, Rockabilly, Bigstage, Vibrato,
Flanger and Chorus etc..
to perform. There are total 16 options for you:
Vibraflange, Funky, Rockabilly, Bigstage, Vibrato,
Flanger and Chorus etc..
PRESETS
19
This control is used to adjust the output level of REVERB signal, which can be varied form 0dB to 10dB.
REVERB LEVEL control
21
This LED lights up when the input signal is too strong.
PEAK LED
22
RIGHT
MAIN MIX OUTPUT
LEFT
2-TRACK IN/OUT
TAPE IN TAPE OUT
L
R
23
- MAIN MIX OUTPUT
This stereo output is controlled by the Main Mix
Level on the front panel and will send the audio
signal to an amplifier. The output level can be varied
from -
Level on the front panel and will send the audio
signal to an amplifier. The output level can be varied
from -
to +15dB.
19
20
21
22
23
24
TAPE IN
- 2-TRACK IN/OUT
24
TAPE OUT
These 1/4" TRS sockets will route the main mix into a tape recorder.
Use the Tape input if you wish to listen to your Mix
from a Taper Recorder or DAT, You can send the
signal coming form the Taper Recorder either to
a pair of studio monitor using the Control Room
assignment on the front panel or you can also send
the signal directly to the Main Mix.
from a Taper Recorder or DAT, You can send the
signal coming form the Taper Recorder either to
a pair of studio monitor using the Control Room
assignment on the front panel or you can also send
the signal directly to the Main Mix.
9
10
8
9
PRESETS
1
12
11
7
4
5
6
3
2
13
14
15
16
0
5
16
13
12
9
8
4
BIGSTAGE
3
ROCKABILLY
2
FUNKY
1
VIBRAFLANGE
FX LEVEL
REVERB LEVEL
10
0
VIBRATO
FLANGER
CHORUS
PEAK
10
FX LEVEL control
20
Rotating this control is used to adjust the output
level of FX signal, which can be varied from 0dB
to 10dB.
level of FX signal, which can be varied from 0dB
to 10dB.