Alto Professional Music Mixer L-6 Manual Do Utilizador
1
4.1 The MIC/LINE channels
2
4.2 INPUT LEVEL setting
This Control is provided with 2 different indication rings: One is for the Mic-
rophone and the other for the Line levels. When you use a microphone you
shall read the OUTSIDE ring (0-60dB); When you use a Line level instrument
you shall read the INSIDE ring (+15~-45dB). For optimum operation you shall
set this control in a way that the peak LED will blink also occasionally in order
to avoid distortion on the input channel.
rophone and the other for the Line levels. When you use a microphone you
shall read the OUTSIDE ring (0-60dB); When you use a Line level instrument
you shall read the INSIDE ring (+15~-45dB). For optimum operation you shall
set this control in a way that the peak LED will blink also occasionally in order
to avoid distortion on the input channel.
1
2
These are Channel 1 and Channel 2. You can connect balanced, low impedance
microphones to the XLR socket. ON the 1/4" phone jack you can connect either
a microphone or a line level instrument. You shall never connect an unbalanced
microphone to the XLR socket if you do not want to damage both the Microphone
and the Mixer.
microphones to the XLR socket. ON the 1/4" phone jack you can connect either
a microphone or a line level instrument. You shall never connect an unbalanced
microphone to the XLR socket if you do not want to damage both the Microphone
and the Mixer.
6
4.1.1 PHANTOM POWER +48 Volts
It is available only on the XLR input sockets.
RIGHT
RIGHT
LEFT(MONO)
LEFT(MONO)
LEFT (MONO)
LINE IN 3/4
LINE IN 5/6
3
4.3 STEREO INPUT (CH3~CH6)
Each stereo channel comes with two balanced line
level inputs on 1/4" TRS jacks, for left and right signals.
When only the left input is connected, the channel
operates in mono.
level inputs on 1/4" TRS jacks, for left and right signals.
When only the left input is connected, the channel
operates in mono.
3
BAL OR
UNBAL
+15dB
-45dB LINE
0dB
60dB
MIC
LINE IN 1
TRIM
MIC 1
1
2
3