Alpine TMI-M990 Manual Do Utilizador
Setup
44
-
EN
4
Press VISUAL EQ or OPEN/CLOSE / SETUP, and
select the preferred item setting.
When you press OPEN/CLOSE / SETUP, you move
to the next item, press VISUAL EQ to move to the
previous item.
select the preferred item setting.
When you press OPEN/CLOSE / SETUP, you move
to the next item, press VISUAL EQ to move to the
previous item.
5
Change the setting by pressing
/ TILT or
/ TILT.
6
To return to the GENERAL SETUP screen, press
/ TILT or
/ TILT after selecting RETURN.
To exit the setup, press and hold OPEN/CLOSE /
SETUP for at least 2 seconds.
SETUP for at least 2 seconds.
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○
To return to the
GENERAL SETUP
screen, select
RETURN.
GENERAL SETUP
screen, select
RETURN.
To exit the setup:
Setting the AUX Mode
Setting item:
AUX IN 1, 2, 3, SIG.
Setting content:
ON/OFF
ON:
AUX source is displayed.
OFF:
AUX source is not displayed.
Before perfoming each setting, please refer to “Setup menu chart” on
page 33 and “AUX IN/S-IN setup standard operation” on page 43.
page 33 and “AUX IN/S-IN setup standard operation” on page 43.