Alpine DVA-9861Ri Manual Do Utilizador
26
-EN
01GB05DVA9861Ri.fm
ALPINE DVA-9861Ri 68-04123Z62-A (EN)
3
-3
*
Turn the Rotary encoder to select the desired bass
level (–7~+10).
You can emphasize or weaken the bass level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the bass control
setting will be turned off automatically.
• The bass level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
bass frequency and bass band width settings adjusted for one source
are effective for all other sources (FM, MW (LW), CD etc.).
bass frequency and bass band width settings adjusted for one source
are effective for all other sources (FM, MW (LW), CD etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Bass Level is still adjustable if an
audio processor with the Bass function is connected.
audio processor with the Bass function is connected.
• This function is inoperable when DEFEAT is set to ON.
• While in the bass adjusting mode, TREBLE CONTROL adjusting
• While in the bass adjusting mode, TREBLE CONTROL adjusting
mode can be recalled by pressing
or
.
* The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 25).
(Between Front and Rear)/Defeat” (page 25).
Bass level indicator’s display
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
preference.
1
Press MENU to select the BASS ENGINE mode, then
press MODE.
press MODE.
BASS ENGINE
SETUP
RETURN (OFF)
BASS ENGINE
2
Press
or
to select the TREBLE (treble
Center frequency) control mode.
BASS
TREBLE
3
-1 Press SOURCE/POWER to select the desired treble
Centre frequency.
10.0kHz
12.5kHz
15.0kHz
7.5kHz
10.0kHz
Emphasizes the displayed Treble frequency ranges.
3
-2
*
Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasize the treble level.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• If no operation is performed within 60 seconds, the treble control
setting will be turned off automatically.
• The treble level settings will be individually memorized for each
source (FM, MW (LW), CD, etc.) until the setting is changed. The
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
Treble frequency settings adjusted for one source are effective for all
other sources (FM, MW (LW), CD, etc.).
• Depending on the connected devices, some functions and display
indications do not work. However, Treble Level is still adjustable if
an audio processor with the Treble function is connected.
an audio processor with the Treble function is connected.
• This function is inoperable when DEFEAT is set to ON.
• While in the treble adjusting mode, BASS CONTROL adjusting mode
• While in the treble adjusting mode, BASS CONTROL adjusting mode
can be recalled by pressing
or
.
* The adjustment can also be made by pressing MODE. Refer to
“Adjusting Bass/Treble/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat” (page 25).
(Between Front and Rear)/Defeat” (page 25).
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold the MODE for at least 2 seconds to
activate or deactivate the loudness mode.
activate or deactivate the loudness mode.
“LD” indicator lights.
Setting the Bass Level
Setting the Treble Centre Frequency
Bass level is usually displayed.
Setting the Treble Level
01GB00DVA9861Ri.book Page 26 Wednesday, December 7, 2005 12:00 PM