Alpha Tool.Com.HK Limited ECOGRDGR Manual Do Utilizador
3
INTRODUCTION
Thank you for purchasing the Alpha
®
Ecoguard Type G Dust Collection Cover. The
Ecoguard Type G must be used with a vacuum, or other dust collection system.
To ensure correct use, read this Instruction Manual and the Instruction Manual for
the power tool and follow the operating instructions. Keep this manual in a place
where operators can access it easily whenever necessary!
To ensure correct use, read this Instruction Manual and the Instruction Manual for
the power tool and follow the operating instructions. Keep this manual in a place
where operators can access it easily whenever necessary!
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classifi ed into
“DANGER”, “WARNING”, and “CAUTION”.
“DANGER”, “WARNING”, and “CAUTION”.
DANGER!
Death or serious personal injury is imminent when handling
this polisher incorrectly.
this polisher incorrectly.
WARNING!
There is a possibility of death or serious personal injury when
handling this polisher incorrectly.
CAUTION!
There is a possibility of personal injury or property damage
when handling this polisher incorrectly.
Note: In some situations, failing to observe WARNING notes could result in
death or serious personal injury. Be sure to read and observe the safety
notes to ensure safety and correct use of the polisher.
notes to ensure safety and correct use of the polisher.
PRECAUTIONS FOR USING DUST COLLECTION COVER
The Dust Collection Cover is for use with a 4.5” (115mm) and 5” (125mm)
high-speed angle grinder.
high-speed angle grinder.
The Dust Collection Cover is designed for grinding concrete, stone and other
masonry products. Do not use when cutting metal or other materials.
masonry products. Do not use when cutting metal or other materials.
The Dust Collection Cover is solely designed for use with a diamond cup
wheel. Do not use with any other type of blade such as a grindstone or
chip saw.
wheel. Do not use with any other type of blade such as a grindstone or
chip saw.
Always check the Dust Collection Cover for damage, cracks or deformation
before starting work. Do not use the Dust Collection Cover if it is damaged,
cracked or bent as this could cause to injury.
before starting work. Do not use the Dust Collection Cover if it is damaged,
cracked or bent as this could cause to injury.
Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or
hearing protection must be used for appropriate conditions.
hearing protection must be used for appropriate conditions.
Keep the Dust Collection Cover away from gasoline, thinner, petroleum
and paraffi n.
and paraffi n.
The supplied connector may not connect securely to every high-speed angle
grinder. In this case, do not use the Dust Collection Cover.
grinder. In this case, do not use the Dust Collection Cover.
1.
2.
3.
4.
5.
6.
7.