Alesis Studio Interface MasterControl Manual De Referência

 

 

 
Press the GLOBAL button to edit the MasterControl’s 
configuration, including where you want to route which channels, 
talkback and footswitch settings, and other features. 
 
Use the PAGE buttons beneath the DISPLAY to scroll through 
the settings.  For each page, you can scroll through your options 
with the VALUE / ENTER knob at top right.  To save your new 
settings, press the knob. 
 
 
„  Screen Contrast   

 

Adjust the contrast of the DISPLAY to an appropriate setting. 
 
 
„  Output A / B / C Source 

 

With the Output Source pages, you can decide which pairs of channels of your digital audio workstation 
(DAW) will be sent to the three outputs of the MasterControl. 
 
Each output – A, B, and C – can receive audio from the DAW’s 
Channels 1 and 2 (Output 1-2), Channels 3 and 4 (Output 3-/4), or 
Channels 5 and 6 (Output 5-6).  A channel pair can be sent to 
multiple outputs at the same time or none at all, allowing you 
flexibility when monitoring the audio in your DAW.  By default, the assignments are: 
 

y

 

OUTPUT A SOURCE: Output 1-2 

y

 

OUTPUT B SOURCE: Output 3-4 

y

 

OUTPUT C SOURCE: Output 5-6 

 
Note: Regardless of how you assign the Output Sources, you can still monitor the physical outputs (on 
the rear panel of the MasterControl) with the MasterControl’s SPEAKERS / OUTPUTS buttons.  You can 
assign what audio is sent to these outputs in your DAW. Your headphones can always monitor any of 
these channel pairs, as well, as determined by the Phones Source pages (below). 
 
„  Phones 1/2 Source 

 

Use the Phones Source pages to decide which pairs of channels 
of your DAW will be sent to each HEADPHONE OUTPUT (on the 
rear of the MasterControl).  Like the Output Sources above, a 
channel pair can be sent from the DAW to one, both, or neither of 
the HEADPHONE OUTPUTS. 

 

 
„  1-2 LEVEL knob operation 

 

By default, this knob controls the levels for outputs 1 and 2 for any of the line outputs that are mapped to 
them in the OUTPUT A / B / C Source menus. 

 

You can change this control here to affect not only 1-2 but also 3-4.  A third option, designed for 5.1 
surround mixing, allows this knob to control all of the outputs (1-6) as played through the 
MasterControl’s six line outputs. 

 

OUTPUT A SOURCE 

  Output 1-2 

SCREEN CONTRAST 

 <--- 50% ---> 

PHONES 1 SOURCE 

  Output 1-2