Algolith VLD-1002-MD Manual Do Utilizador
VLD-1002-MD
Guide to installation and operation
16
Selecting the Reference
The VLD-1002-MD card provides four methods for referencing the
incoming video signal. At the bottom of the Card Setup window, the
reference selection can be chosen from a drop down menu. The reference
selection is automatically saved and will be restored after power-up.
incoming video signal. At the bottom of the Card Setup window, the
reference selection can be chosen from a drop down menu. The reference
selection is automatically saved and will be restored after power-up.
The VLD-1002-MD accepts tri-level, bi-level and black burst reference
signals. The video inputs can be synchronized with the house sync
signal.
signals. The video inputs can be synchronized with the house sync
signal.
The VLD-1002-MD card synchronizes the video input 1 and the video input
2 with the same reference signal. Therefore, it is mandatory for input 1
and input 2 to be of the same video format.
2 with the same reference signal. Therefore, it is mandatory for input 1
and input 2 to be of the same video format.
Reference Selection
The Reference Selection function allows the user to select from 4
possible synchronization signals.
possible synchronization signals.
Select from:
Internal Ch1: Extracts the reference from the channel 1 (input 1) video
signal. With this selection, the VLD-1002-MD card needs a valid video
signal at input 1 to properly synchronize. If you are only connecting one
video signal to the VLD-1002-MD card’s rear module, use input 1.
signal. With this selection, the VLD-1002-MD card needs a valid video
signal at input 1 to properly synchronize. If you are only connecting one
video signal to the VLD-1002-MD card’s rear module, use input 1.
External 1 (Frame Ref 1): The openGear frame has a distributed frame
reference, allowing a single incoming reference sync signal to feed
information to all modules in a frame. External 1 uses the reference signal
from the openGear frame’s REF 1 input.
reference, allowing a single incoming reference sync signal to feed
information to all modules in a frame. External 1 uses the reference signal
from the openGear frame’s REF 1 input.
External 2 (Frame Ref 2): Uses the reference signal from the openGear
frame’s REF 2 input.
frame’s REF 2 input.
16