AIS Router AI2524 Manual Do Utilizador
AI2524 Router Card User’s Manual
Page 7-10
August 1997
2524UM
2.
List information about Flash memory, including system image
filenames, amounts of memory used and remaining, and Flash par-
titions.
filenames, amounts of memory used and remaining, and Flash par-
titions.
show flash [all | chips | detailed | err |
partition
number [all | chips | detailed |
err] | summary]
3.
View the console output generated during the Flash load helpe
operation.
operation.
show flh-log
4.
List the configuration information in running memory.
show running-config
5.
List the startup configuration information. The startup configura-
tion is usually NVRAM.
tion is usually NVRAM.
show startup-config
6.
List the system software release version, configuration register
setting, and so on.
setting, and so on.
show version
You can also use th
o
command in ROM monitor mode to list th
configuration register settings on some models.
The Flash memory content listing does not include the checksum of in-
dividual files. To recompute and verify the image checksum after th
image is copied into Flash memory, type the following in EXEC
mode:
dividual files. To recompute and verify the image checksum after th
image is copied into Flash memory, type the following in EXEC
mode:
verify flash
When you enter this command, the screen prompts you for the file-
name to verify. By default, it prompts for the last (most recent) file in
Flash. Press <Enter> to recompute the default file checksum, or enter
the filename of a different file at the prompt. Note that the checksum
for microcode images is always 0x0000.
name to verify. By default, it prompts for the last (most recent) file in
Flash. Press <Enter> to recompute the default file checksum, or enter
the filename of a different file at the prompt. Note that the checksum
for microcode images is always 0x0000.