AIS Router AI2524 Manual Do Utilizador
AI2524 Router Card User’s Manual
Page 7-14
August 1997
2524UM
sence of critical configuration information. Refer to
, for details on the setup command facility.
Configure the Cisco IOS software from Memory
To configure the software to execute the commands located in
NVRAM or to execute the configuration specified by the
CONFIG_FILE environment variable, type this command in privi-
leged EXEC mode:
NVRAM or to execute the configuration specified by the
CONFIG_FILE environment variable, type this command in privi-
leged EXEC mode:
configure memory
Configure the Cisco IOS software from the Network
You can configure the software by retrieving and modifying a config-
uration file stored on one of your network servers:
uration file stored on one of your network servers:
1.
Enter configuration mode with the network option.
copy tftp running-config
2.
At the system prompt, select a network or host configuration file.
The network configuration file contains commands that apply to
all network servers and terminal servers on the network. The host
configuration file contains commands that apply to one network
server in particular.
The network configuration file contains commands that apply to
all network servers and terminal servers on the network. The host
configuration file contains commands that apply to one network
server in particular.
{
host | network}
3.
At the system prompt, enter the optional IP address of the remote
host from which you are retrieving the configuration file.
host from which you are retrieving the configuration file.
ip-address
4.
At the system prompt, enter the name of the configuration file or
accept the default name.
accept the default name.
filename
5.
Confirm the configuration filename that the system supplies.
y