Aiphone KCW-M Folheto

Página de 2
- INSTRUCTIONS -
The KCW-M adaptor converts a standard CCTV camera's signal to a 2-wire signal, compatible with the KC 1x3 
Color Video system. This allows the utilization of a color CCTV camera and a separate audio door station (JA-D) 
to be used in place of a KC-DAR video door station. The CCTV camera can also be connected to a standard 
CCTV system for continual viewing and/or recording. The unit is equipped with a relay output to trigger an 
external device, such as a DVR or video switcher whenever the audio and video to the Aiphone monitor is on. 
Video Modulator with Audio Door Station and CCTV Interface
1A1
1A2
B1
B2
+
-
KC-1MRD 
or KC-1GRD
MASTER
A1
A2
AUDIO
1
2
VIDEO IN
VIDEO OUT
RELAY
NO
NO
KCW-M
PS-24*
+
-
Pg. 1
NOTES:
1. JA-D is the only compatible door   
 station with this unit.
2. Video Output is optional. If not 
used, set  75 ohm switch to ON
position.
WIRING DIAGRAM:
KCW-M Modulator for Standard CCTV camera and Audio Only door station
OUT
IN
VIDEO
OFF  ON
75 OHM
AIPHONE
SENSOR    RELAY    MASTER    AUDIO
NC NC  NO NO  A1  A2   1   2
JA-D
1
2
CCTV Camera
75 Ohm, 1V Peak-to-peak
(Independently powered)
KC-1MRD: PS-2410A
KC-1GRD: PS-2420UL
Constant video output for 
CCTV monitor, DVR, etc.
Normally Open contact for 
remote device activation 
(i.e. video switcher, DVR, etc.)
When VIDEO OUT is connected, set 
75 Ohm switch to OFF position.