ADIC Scalar Series Manual Do Utilizador
4
The Scalar 448
l
Manual Cartridge Use. Individual cartridges can easily be transported to the drives through the Mailbox.
l
Cartridge Pre-Check. Whenever you power up your Scalar Library the Media Picker will scan the cartridge
storage slots and build a log of valid cartridge locations. Sensors in the Mailbox allow a similar mapping of
the area.
storage slots and build a log of valid cartridge locations. Sensors in the Mailbox allow a similar mapping of
the area.
l
Reverse Cartridge Protection. The cartridge storage slots, and the slots in the Mailbox employ a design that
prevents the cartridges from being inserted incorrectly.
prevents the cartridges from being inserted incorrectly.
l
Downloadable Firmware. Both your Scalar Library and the DLT drives employ Flash EEPROM technology
permitting easy on-site installation of firmware updates from the host computer.
permitting easy on-site installation of firmware updates from the host computer.
l
Built-in Diagnostics. Your Scalar Library includes diagnostic firmware that tells you when drive head
cleaning is required, reports diagnostic results, and drive operating status. Embedded data logging of
operational embedded and drive errors embedded aid you in failure analysis.
cleaning is required, reports diagnostic results, and drive operating status. Embedded data logging of
operational embedded and drive errors embedded aid you in failure analysis.
Options
DLT Drives
Your adic library can be equipped with second-, third-, or fourth-generation DLT drives. All drive models
(DLT2000XT, DLT4000, and DLT7000) can read and write 2.6 GB, 6.0 GB, and 10.0 GB tape formats for 100%
interchange compatibility with earlier DLT drives. Tape density is selectable by the application software or a
button on the drive.
(DLT2000XT, DLT4000, and DLT7000) can read and write 2.6 GB, 6.0 GB, and 10.0 GB tape formats for 100%
interchange compatibility with earlier DLT drives. Tape density is selectable by the application software or a
button on the drive.
Drive Model
Cartridge Max Capacity
(compressed mode)
(compressed mode)
Library Max Capacity
(compressed mode)
(compressed mode)
Sustained Transfer Rate
(compressed mode)
(compressed mode)
DLT2000XT
20 GB (DLTtape III)
30 GB (DLTtape IIIXT)
480 MB (Scalar 224)
960 MB (Scalar 448/458)
960 MB (Scalar 448/458)
720 MB (Scalar 224)
1.44 TB (Scalar 448/458)
1.44 TB (Scalar 448/458)
2.5 MB/sec/drive
(150 MB/min/drive)
(150 MB/min/drive)
DLT4000
20 GB (DLTtape III)
30 GB (DLTtape IIIXT)
40 GB (DLTtape IV)
480 MB (Scalar 224)
960 MB (Scalar 448/458)
960 MB (Scalar 448/458)
720 MB (Scalar 224)
1.44 TB (Scalar 448/458)
1.44 TB (Scalar 448/458)
960 MB (Scalar 224)
1.92 TB (Scalar 448/458)
1.92 TB (Scalar 448/458)
3.0 MB/sec/drive
(180 MB/min/drive)
(180 MB/min/drive)
DLT7000
20 GB (DLTtape III)
30 GB (DLTtape IIIXT)
70 GB (DLTtape IV)
480 MB (Scalar 224)
960 MB (Scalar 448/458)
960 MB (Scalar 448/458)
720 MB (Scalar 224)
1.44 TB (Scalar 448/458)
1.44 TB (Scalar 448/458)
3.36 TB (Scalar 448/458)
10.0 MB/sec/drive
(600 MB/min/drive)
(600 MB/min/drive)
Maximum Capacity and Sustained Transfer Rates
Differential SCSI
Differential SCSI is available for the robotics. The drives can be all differential, all single-ended, or a mix of both.