Husqvarna DXR-310 Manual Do Utilizador

Thank you for choosing a Husqvarna DXR-310!

We hope you will fi nd this operator’s manual very use-
ful. By following its instructions (on operation, service, 
maintenance, etc.) you will signifi cantly extend the life 
of the machine and even its second-hand value.

Husqvarna products are sold all over the world and 
ensures that you, the customer, get the best support 
and service. When you need spare parts or advice on 
service or warranty issues, go to www.husqvarnacp.
com and fi nd your local service agent.

The machine’s serial number is indicated on a plate 
located on the hydraulic tank. Stated on the plate are:

•  The machine’s type designation

•  Weight

•  The manufacturer’s type number

•  The machine’s serial number

•  Manufacturer

The hydraulic pump and hydraulic motors are fi tted 
with rating plates that indicate article number and the 
machine manufacturer’s manufacture number.

Please state the type designation and serial number 
when ordering spare parts and for service matters.

•  Demolishing, fragmenting, cutting, detaching, 

separating, picking up and distributing parts of 
buildings and constructions.

•  Use in risky environments where the operator can 

control the machine without being present within 
the risk area.

•  Use both indoors and outdoors.

•  Use in dangerous environments where the machine 

is exposed to risk of collapse, hazardous sub-
stances, great heat, etc.

•  Use in environments classifi ed as ’fl ammable” 

provided that it has the correct power connection 
and all its equipment is correctly dimensioned and 
undamaged. The operator must take the risk of 
spark formation into consideration when working in 
fl ammable environments..

•  Use in areas classifi ed as ’explosive”.

•  Use in water where the level risks damaging the 

machine’s equipment.

•  Operation on a public highway.

•  Use as a towing vehicle, means of transport or lift-

ing device.

•  Use in environments where there is danger for 

the operator or the life and health of people in the 
vicinity.

•  Use in applications or environments that are not 

compatible with the recommendations in this Op-
erator’s Manual.

It is the owner’s/employer’s responsibility that the op-
erator has suffi cient knowledge about how to use the 
machine safely. Supervisors and operators must have 
read and understood the Operator’s Manual. They 
must be aware of:

•  The machine’s safety instructions.

•  The machine’s range of applications and limita-

tions.

•  How the machine is to be used and maintained.

Husqvarna Construction Products reserves the right 
to alter specifi cations and instructions for the machine 
without prior notifi cation. The machine may not be 
modifi ed without the manufacturer’s written permis-
sion. If the machine is modifi ed after delivery from 
Husqvarna Construction Products and without the 
manufacturer’s written permission, it is the owner’s 
responsibility.

Modifi cation can entail new risks for operators, the 
machine and the surroundings. These can include 
impaired strength or inadequate protection. It is the 
responsibility of the owner to specify which altera-
tions are going to be made and to contact the supplier 
of the machine for approval before commencing the 
modifi cations.

All information and all data in the Operator’s Manual 
were applicable at the time the Operator’s Manual was 
sent to print.

Contact
Husqvarna Construction Products, Jons väg 19,
SE-433 81 Göteborg, Sweden.

4

 - English