Cirkuit Planet ICA-525-PA Manual Do Utilizador

                                                                                                 

5.  When using the side conduit cabling, it is suggested to cover the cables using metal covers (to 

prevent external damage and for waterproof prevention), and wined the waterproof adhesive 
type onto the metal cover before installation. 

 

 

6.  Connect the LAN cable to Ethernet’s switch or hub and the DC-Jack to the power source. The 

video output to monitor or other video through a 75 Ohms type coaxial cable if you will use 
BNC cable. 

 

7. Done 

 

This chapter shows how to quick set up your ICA-525. The ICA-525 is with the default settings. 
However to help you find the networked camera quickly the windows utility-IP Wizard can search 
the cameras in the network that shall help you to configure some basic setting before you started 
advanced management and monitoring. 

 

1.  Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed, 

a welcome menu screen will appear. Please click your IP camera model name to next page.   

 

2.  Click the “IP Wizard” hyperlink; you will see the InstallShield Wizard dialog box as below. 

NOTE:  If the welcome screen does not appear, click “Start” at the taskbar. Then, select 

“Run” and type “D:\Utility\IPWizard\setup.exe”, assume D is your CD-ROM drive. 

 

 

 

 

 

 

 11