Dixon Aficio 1515 Manual Do Utilizador

The Machine Does Not Print

15

Is the power on?

Check the cable is securely plugged into the power outlet and the 
machine. 

Turn on the main power switch.

Is the machine online?

If not, press 

{{{{f

f

f

fOnline}}}} on the control panel.

Does the Printer key stay 
red?

If so, check the error message on the display and take required ac-
tion.

Is there a warning status or 
error message on the dis-
play?

If so, check the error message or warning status on the display and 
take the required action.

Can you print a configura-
tion page?

If you cannot print a configuration page, there maybe a machine 
malfunction. Contact your sales or service representative.

See p.26 “Printing the configuration page” for printing a configu-
ration page.

Is the interface cable con-
nected securely to the ma-
chine and computer?

Connect the interface cable securely. If it has a fastener, fasten that 
securely as well.

See “Connecting the Machine”, Printer Reference 1.

Are you using the correct 
interface cable?

The type of interface cable you should use depends on the compu-
ter. Be sure to use the correct one. If the cable is damaged or worn, 
replace it.
See “Connecting the Machine”, Printer Reference 1.

Was the interface cable 
connected after the ma-
chine was turned on?

Connect the interface cable before turning on the machine.

Is the signal status satisfac-
tory when using wireless 
LAN in infrastructure 
mode ?

To check signal status, press the 

{{{{User Tools/Counter}}}} key, and then 

select [System Settings] using 

{{{{U

U

U

U}}}} or {{{{T

T

T

T}}}}. On the [Interface Settings], 

select [IEEE 802.11b], and then select [Wireless LAN Signal] using 

{{{{U

U

U

U}}}}or {{{{T

T

T

T}}}}. If signal quality is poor, remove objects that might 

cause interference.

❒ You can check signal status only when using wireless LAN in 

infrastructure mode.

When using wireless LAN, 
is the SSID correctly set?

Check using the machine's control panel that the SSID is correctly 
set.

See “Interface Settings/IEEE 802.11b (Option)”, Network Guide.

When using wireless LAN, 
is the access point correctly 
set?

Check access point settings when in infrastructure mode. Depend-
ing on the access point, client access may be limited by MAC ad-
dress.

Also, check there are no problems in transmission between access 
point and wired clients, and between access point and wireless cli-
ents.