Digi Tech V-10 Manual Do Proprietário

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

THE APPARATUS SHALL NOT BE ExPOSED TO DRIPPING OR SPLASHING LIqUID AND NO 

OBjECT FILLED WITH LIqUID, SUCH AS vASES, SHALL BE PLACED ON THE APPARATUS

CLEAN ONLY WITH A DRY CLOTH.

FOR INDOOR USE ONLY.

DO NOT BLOCK ANY OF THE vENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH 

THE MANUFACTURER’S INSTRUCTIONS.

DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOvES, 

OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG 

PERIODS OF TIME.

do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has 

two blades with one wider than the other. A grounding type plug has two blades and a third 

grounding prong. the wide blade or third prong are provided for your safety. if the provided 

plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.
protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus.

use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with 

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination 

to avoid injury from tip-over.  

refer all servicing to to qualified service personnel. servicing is required when the apparatus 

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 

moisture, does not operate normally, or has been dropped.

POWER ON/OFF SWITCH: For products provided with a power switch, the power switch does 

Not break the connection from the mains.

MAINS DISCONNECT: the plug shall remain readily operable. For rack-mount or installation 

where plug is not accessible, an all-pole mains switch with a contact separation of at least 3 

mm in each pole shall be incorporated into the electrical installation of the rack or building.

FOR UNITS EqUIPPED WITH ExTERNALLY ACCESSIBLE FUSE RECEPTACLE: replace fuse 

with same type and rating only.

MULTIPLE-INPUT vOLTAGE: this equipment may require the use of a different line cord, 

attachment plug, or both, depending on the available power source at installation. connect 

this equipment only to the power source indicated on the equipment rear panel. to reduce 

the risk of fire or electric shock, refer servicing to qualified service personnel or equivalent.

if connected to 240V supply, a suitable csA/uL certified power cord shall be used for this supply.