Denso BHT-6000 Manual Do Utilizador
24
(3)
Press the 3 key on the SET SYSTEM screen
to select the "DATE/TIME" and then press the
ENT key, and the screen shown at left will
appear.
to select the "DATE/TIME" and then press the
ENT key, and the screen shown at left will
appear.
(4)
Use the numerical keys to enter the year (only
the last two digits), month, day, hour, and
minute in this order. If the data is in one
digit, add a 0 (zero) preceding the data.
the last two digits), month, day, hour, and
minute in this order. If the data is in one
digit, add a 0 (zero) preceding the data.
For the year, be sure to enter the last two
digits of the year. For the hour, enter it
in the 24-hour format.
in the 24-hour format.
If any of the year, month, day, hour, and
minute is not entered, the ENT key
does not become operable.
does not become operable.
If you make a wrong entry, press the BS key
to delete it and then enter the correct data.
to delete it and then enter the correct data.
[ 2 ] Setting the Calendar Clock (date and time)
(1)
While holding down the SF and 1 keys,
press the PW key to start System Mode. The
SYSTEM MENU shown at left will appear.
press the PW key to start System Mode. The
SYSTEM MENU shown at left will appear.
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
SET SYSTEM
1:PROGRAM
6:COM
2:DISPLAY 7:KEY
3:DATE/TIME
4:BARCODE
5:RESUME
3:DATE/TIME
4:BARCODE
5:RESUME
(2)
Press the 4 key to select the "SET SYSTEM"
on the SYSTEM MENU and then press the
ENT key, and the screen shown at left will
appear.
on the SYSTEM MENU and then press the
ENT key, and the screen shown at left will
appear.
(To return to the immediately preceding
screen during this setting procedure, press
the C key.)
screen during this setting procedure, press
the C key.)
SET DATE/TIME
00/01/01 00:00
_ / / :
NOTE