Denso BHT-6000 Manual Do Utilizador

29

Chapter 2.  Getting Started the BHT-6000 and System Mode

System Mode is an operating software exclusively designed for the effective use of the
BHT-6000, which includes various functions as shown on the following pages.

To start up System Mode, power on the BHT-6000 while holding down the  SF  and  1
keys.  This operation calls up the SYSTEM MENU on the LCD as shown below.

SYSTEM MENU

 

1:EXEC PROGRAM

 2:DOWNLOAD
 3:UPLOAD
 4:SET SYSTEM
 5:TEST  6:VER

The function selected is reverse-displayed (white-on-black) with the cursor.  To select a
desired item in System Mode, press the corresponding numerical key and then press
the  ENT  key.

The keys below are so designed that the function of each key is consistent in every
screen.

Numerical keys

Pressing a numerical key corresponding with a desired
menu number selects the desired item displayed on the
screen.

 ENT  key

Pressing this key registers the selected item and executes
the corresponding function.

Pressing  F5  and  F6  moves the cursor up and down,
respectively, to select a desired item.

Pressing  F7  and  F8  moves the cursor to the left and
right, respectively, to select a desired setting.

The  C  key is inoperative on the SYSTEM MENU.  On other screens, pressing the  C
key returns to the immediately preceding screen.

The power-on default is "EXEC PROGRAM" which is reverse-displayed.  Once any
other item is selected, the selected item will be reversed with the cursor when you turn
back to the SYSTEM MENU.

  F5  and  F6  keys

  F7  and  F8  keys