Delta Tau COMPACT UMAC Manual Do Utilizador
UMAC-CPCI Turbo CPU Board Hardware Reference Manual
BOARD CONFIGURATION
The base version of the Compact UMAC Turbo CPU board provides a 1-slot 3U-format Eurocard board
with:
with:
80 MHz DSP56303 CPU (120 MHz PMAC equivalent)
•
•
•
•
•
•
•
•
•
•
•
•
•
128k x 24 SRAM compiled/assembled program memory (Opt. 5C0)
128k x 24 SRAM user data memory (Opt. 5C0)
1M x 8 flash memory for user backup & firmware (Opt. 5C0)
Latest released firmware version
RS-232/422 serial interface, available both on front-panel DB-9 connector and on backside field-
wiring connector
Backplane Compact UBUS expansion connector for communication to servo and I/O accessory
boards
Backside field-wiring connector
128k x 24 SRAM user data memory (Opt. 5C0)
1M x 8 flash memory for user backup & firmware (Opt. 5C0)
Latest released firmware version
RS-232/422 serial interface, available both on front-panel DB-9 connector and on backside field-
wiring connector
Backplane Compact UBUS expansion connector for communication to servo and I/O accessory
boards
Backside field-wiring connector
Option 1: Communications Interfaces
The Compact UMAC Turbo CPU board comes standard only with an RS-232/422 serial interface. The
Option 1 family provides faster interfaces for high-speed communications – Universal Serial Bus (USB),
Ethernet, or the link to the CPCI bus through a bridge daughter board.
Option 1 family provides faster interfaces for high-speed communications – Universal Serial Bus (USB),
Ethernet, or the link to the CPCI bus through a bridge daughter board.
Current Revision Communication Options (rev 103 and above)
Option 1: 100 Mbit/sec UDP/IP, TCP/IP Ethernet Communications Interface.
•
•
•
•
•
•
•
•
•
•
Option 1A: 480 Mbit/sec USB 2.0 Communications Interface (USB 1.1 compatible)
Option 1B: Solder-side stack connectors to CPCI-bridge daughter board. This option should be ordered
only when the bridge board is to be installed on the left side of the CPU board, so the CPU board is in the
leftmost slot of the Compact UBUS backplane, and the bridge board is in the rightmost slot of the
Compact PCI bus backplane.
Option 1B: Solder-side stack connectors to CPCI-bridge daughter board. This option should be ordered
only when the bridge board is to be installed on the left side of the CPU board, so the CPU board is in the
leftmost slot of the Compact UBUS backplane, and the bridge board is in the rightmost slot of the
Compact PCI bus backplane.
Legacy Revision Communication Options (rev 102 and below)
Option 1: On-board 10-Base-T TCP/IP Ethernet interface. The key added components are U67 and U32.
Option 1A: On-board 12 Mbit/sec USB interface. The key added component is U67.
Option 1B: Solder-side stack connectors to CPCI-bridge daughter board. This option should be
ordered only when the bridge board is to be installed on the left side of the CPU board, so the CPU
board is in the leftmost slot of the Compact UBUS backplane, and the bridge board is in the rightmost
slot of the Compact PCI bus backplane.
Option 1A: On-board 12 Mbit/sec USB interface. The key added component is U67.
Option 1B: Solder-side stack connectors to CPCI-bridge daughter board. This option should be
ordered only when the bridge board is to be installed on the left side of the CPU board, so the CPU
board is in the leftmost slot of the Compact UBUS backplane, and the bridge board is in the rightmost
slot of the Compact PCI bus backplane.
Option 2: Dual-Ported RAM
With either the Option 1 Ethernet interface, or the Option 1A USB interface, communications throughput
can be increased through the use of dual-ported RAM, which provides a bank of memory that can be
directly accessed by both the Compact UMAC Turbo CPU and the communications microcontroller.
can be increased through the use of dual-ported RAM, which provides a bank of memory that can be
directly accessed by both the Compact UMAC Turbo CPU and the communications microcontroller.
Option 2: 32k x 16 bank of on-board dual-ported RAM (requires Option 1 or 1A) in component U56.
•
Option 5: CPU and Memory Configurations
The various versions of Option 5 provide different CPU speeds and main memory sizes on the piggyback
CPU board. Only one Option 5xx may be selected for the board.
CPU board. Only one Option 5xx may be selected for the board.
2
Board Configuration