DataVideo MP-6000 Mk2 Manual Do Utilizador

37

To access other options press the Down Arrow button to select 

Contrast, Color and Tint (NTSC only) 

The procedure for setting Contrast, Color and Tint (NTSC only) is the same as for Brightness. 

Once all the adjustments are correct, press the Menu button to 

exit the Color Correction menu and return to the General 

Display 

These color correction settings will be stored as your default settings for the unit.   

If you wish to return to the factory default at any point, follow the above procedure but highlight DEFAULT 

and press the Enter button, then highlight SAVE and press the Enter button again. 

This setting applies to analogue inputs only; it is not available from a DV (Digital) source. 

It is important to make sure that the audio level from your input source is not too high, as this will cause 

distortion on the finished disc. The MP 6000 has a built in audio level control that allows you to optimize the 

audio level prior to recording. 

The LED’s above the adjustment knob will light up to show the volume of the incoming audio. It is ideal to 

adjust the knob so that the red LED occasionally lights up, when then is a particularly loud noise, but it is 

not illuminated at any other time.