BMW 2011 M3 Convertible Manual Do Proprietário

 35

The engine can only be switched off when the 
selector lever is in position P, refer to page

.

To switch the engine off when the selector lever 
is in position N, the remote control must be in 
the ignition lock.

Comfort Access may malfunction due to local 
radio waves. If this happens, open or close the 
vehicle via the buttons on the remote control or 
using the integrated key. To start the engine 
afterward, insert the remote control into the 
ignition lock.

The warning lamp in the instrument 
cluster lights up when you attempt to 
start the engine: the engine cannot 

be started. The remote control is not inside the 
vehicle or is malfunctioning.
Take the remote control with you inside the 
vehicle or have it checked. If necessary, insert 
another remote control into the ignition lock.

The warning lamp in the instrument 
cluster lights up while the engine is 
running: the remote control is no 

longer inside the vehicle. After the engine is 
switched off, the engine can only be restarted 
within approx. 10 seconds.

The indicator lamp in the instrument 
cluster comes on and a message 
appears on the Control Display: 

replace the battery in the remote control.

The remote control for Comfort Access con-
tains a battery that will need to be replaced from 
time to time.

1.

Take the integrated key out of the remote 
control, refer to page

.

2.

Remove the cover.

3.

Insert the new battery with the plus side fac-
ing up.

4.

Press the cover on to close.

Take the old battery to a battery collec-
tion point or to your BMW center.

<

To prevent injuries, watch the windows 
while closing them. 

Take the remote control with you when you 
leave the car; otherwise, children could operate 
the electric windows and possibly injure them-
selves.

<

Online Edition for Part no. 01 41 2 604 638 - © 02/10 BMW AG