BMW 2011 X3 xDrive35i Manual Do Proprietário
In the storage compartment below the
cargo area floor*
The socket is located in the storage compart‐
ment under the cargo area floor.
Remove the cover.
ment under the cargo area floor.
Remove the cover.
Cargo area
Trunk cover
Pull out the trunk cover and hook it into the hold‐
ers.
ers.
Do not stow heavy objects
Only stow light objects in the compart‐
Only stow light objects in the compart‐
ments; otherwise, damage may occur.◀
Do not let the trunk cover snap back into
place
place
Do not allow the trunk cover to snap back into
place; this can damage it.◀
place; this can damage it.◀
Removing and inserting
Trunk cover without partition net:
Removing
To load bulky luggage, the cover can be re‐
moved.
moved.
Reach under the cover and push it up. Pull the
cover back horizontally.
cover back horizontally.
Trunk cover with partition net:
Removing
To load bulky luggage, the cover can be re‐
moved.
moved.
1.
Press the button, arrow 1, to unlock the
cover.
cover.
2.
Pull the cover back, arrow 2.
Installing
Push the cover back horizontally until it engages
audibly.
audibly.
Enlarging the cargo area
General information
The cargo area can be enlarged by folding down
the rear seat backrest.
The rear seat backrest is divided into two parts
at a ratio of 60 to 40.
the rear seat backrest.
The rear seat backrest is divided into two parts
at a ratio of 60 to 40.
Danger of pinching
Before folding down the rear seat backr‐
Before folding down the rear seat backr‐
ests, ensure that the area of movement of the
backrests is clear. In particular, ensure that no
one is located in the area of movement and that
backrests is clear. In particular, ensure that no
one is located in the area of movement and that
Seite 110
110
Online Edition for Part no. 01 40 2 606 190 - 12 10 500
Interior equipment