BMW 2011 328i Convertible Manual Do Proprietário

 103

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive light control is 
malfunctioning or has failed. Have the system 
checked as soon as possible.

1 High beams
2 Headlamp flasher
3 Roadside parking lamps

There is an additional option of switching on the 
lamps on the side of the car facing the road 
when parked.

After parking the vehicle, press the lever up or 
down beyond the pressure point for a longer 
period, arrow 

3.

The roadside parking lamps drain the bat-
tery. Therefore, do not leave them on for 

unduly long periods of time; otherwise, the bat-
tery might not have enough power to start the 
engine.

<

Press the lever in the opposite direction to the 
pressure point, arrow 

3.

This system automatically switches the high 
beams on and off. The procedure is controlled 
by a sensor on the front of the interior rearview 
mirror. The assistant ensures that the high 
beams are switched on whenever the traffic sit-
uation allows. It handles this task for you and 
gives you the benefit of the best possible view. 
You can intervene at any time and switch the 
high beams on and off as usual.

1.

Turn the light switch to position

3, refer to 

page

2.

With the low beams switched on, briefly 
push the turn indicator lever in the direction 
of the high beam.

The indicator lamp in the instrument 
cluster lights up when the high beams 
are activated. The system automati-

cally switches from high beams to low beams 
and vice versa in response to oncoming traffic, 
traffic ahead of you, and adequate ambient 
lighting, e.g. on city streets.

Online Edition for Part no. 01 41 2 604 619 - © 02/10 BMW AG