BMW 2011 528i Sedan Manual Do Proprietário
The alarm system responds in situations such
as attempts to steal a wheel or tow the car.
as attempts to steal a wheel or tow the car.
Interior motion sensor
The windows and glass sunroof* must be closed
for the system to function properly.
for the system to function properly.
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor
can be switched off together, such as in the fol‐
lowing situations:
can be switched off together, such as in the fol‐
lowing situations:
▷
In automatic car washes
▷
In duplex garages.
▷
During transport on car-carrying trains, at
sea or on a trailer.
sea or on a trailer.
▷
When animals are to remain in the vehicle.
Switching off the tilt alarm sensor and
interior motion sensor
Press the button on the remote control
twice in succession.
twice in succession.
The indicator lamp lights up for approx. 2 sec‐
onds and then flashes continuously.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.
onds and then flashes continuously.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.
Power windows
General information
Take the remote control with you
Take the remote control with you when
Take the remote control with you when
leaving the vehicle so that children, for example,
cannot operate the power windows and injure
themselves.◀
cannot operate the power windows and injure
themselves.◀
Opening
▷
Press the switch to the resistance
point.
The window opens while the switch is held.
The window opens while the switch is held.
▷
Press the switch beyond the resist‐
ance point.
The window opens automatically.
The window opens automatically.
Pressing again stops the motion.
Closing
Danger of pinching
Monitor the closing process and make
Monitor the closing process and make
sure that the closing path of the window is clear;
otherwise, injuries may result.◀
otherwise, injuries may result.◀
▷
Pull the switch to the resistance point.
The window closes while the switch is held.
▷
Pull the switch beyond the resistance
point.
The window closes automatically.
The window closes automatically.
Pressing the switch stops the motion.
Convenient operation, refer to page
Convenient operation, refer to page
, via the
remote control.
Convenient closing, refer to page
Convenient closing, refer to page
, with Com‐
fort Access*.
Pinch protection
If the closing force exceeds a specific value as a
window closes, the closing action is interrupted.
The window reopens slightly.
window closes, the closing action is interrupted.
The window reopens slightly.
Danger of pinching even with pinch pro‐
tection
tection
Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀
Window accessories
Do not install any accessories in the range
Do not install any accessories in the range
of movement of the windows; otherwise, the
pinch protection system will be impaired.◀
pinch protection system will be impaired.◀
Seite 40
40
Online Edition for Part no. 01 40 2 606 469 - 03 11 490
Opening and closing