BMW 2011 135i Coupe Manual Do Proprietário

riv

135

Side turn signals

W5W bulb, 5 watts

Press the rear edge of the lamp toward the
front with your fingertip, arrow

1 and pivot it

out, arrow

While simultaneously lifting the retaining
tab, rotate bulb holder to the left and
remove.

Remove lamp and replace it.

To install, insert front end of the lamp and press
into place at the back.

Tail lamps

Turn signal:
PY21W bulb, 21 watts

Backup lamp:
W16W bulb, 16 watts

Brake lamps:
P21W bulb, 21 watts

Brake Force Display lamp:
H21W bulb, 21 watts

1 Inner brake lamp
2 Outer brake lamp
3 Lateral reflector
4 Roadside parking lamp and tail lamp LED
5 Reflector

6 Turn signal
7 Backup lamp
8 Brake Force Display lamp

Replacing tail lamps

Outer brake lamp

The outer brake lamp can be accessed through
a single socket.
The figure shows the right side of the vehicle.

Remove the cover from the panel of the
cargo area.

Turn the bulb holder to the left, see arrow,
and remove it.

Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.

Attach the bulb holder and turn it all the way
in the opposite direction.

Reattach the cover.

The roadside parking lamp/tail lamp uses
LED design. After replacing the bulb,

ensure that the bulb holder is properly seated;
otherwise, the roadside parking lamp/tail lamp
may not work.