BMW 2011 135i Coupe Manual Do Proprietário

t a

lanc

riv

g tip

ilit

Settings for the display in the instrument
cluster:

12h/24h format of the clock, refer to
page

Date format, refer to page

Units of measure for fuel consumption,
distance covered/remaining distances,
and temperature, refer to page

Light settings:

Pathway lighting, refer to page

Daytime running lights, refer to page

High-beam assistant

, refer to page

Automatic climate control

: AUTO pro-

gram, cooling function and automatic recir-
culated-air control activation/deactivation,
temperature, air volume and distribution,
refer to page

Entertainment:

Speed-dependent volume control, refer
to separate Owner's Manual

Central locking system

The concept

The central locking system functions when the
driver's door is closed.
The system simultaneously engages and
releases the locks on the following:

Doors

Trunk lid

Fuel filler flap

Operating from outside

Via the remote control

Via the door lock

In cars with Comfort Access

, via the han-

dles on the driver's and front passenger
doors

In addition, if the remote control is used, the
welcome lamps

, interior lamps and the door's

courtesy lamps

are switched on or off. The

alarm system

is also armed or disarmed.

For further details on the alarm system

, refer

to page

Operating from inside

By means of the button for central locking, refer
to page

In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.

Opening and closing:

Using the remote control

Persons or animals in a parked vehicle
could lock the doors from the inside. You

should therefore take the remote control with
you when you leave the vehicle so that the latter
can be opened from outside.

Convertible: to operate the convertible
top with the remote control, the doors and

trunk lid must be closed and the cargo area par-
tition must be folded down and engaged on
both sides. Refer also to page

Unlocking

Press the

button.

The interior lamps, the courtesy lamps

and the

welcome lamps come on.

Setting unlocking characteristics

You can set whether only the driver's door or
the entire vehicle is to be unlocked when the
button is pressed for the first time.
For operating principle refer to page

Switch on the ignition, refer to page

Briefly press button

1 in the turn signal/high

beam lever up or down repeatedly until the
symbol appears in the display, accompa-
nied by the word "SET".