BMW 2011 135i Coupe Manual Do Proprietário

Página de 176
 41
Call-up with the remote control
The driver's seat position last set is stored for 
the remote control currently in use.
You can select whether or not the seat is reset 
to that position automatically.
When this Personal Profile function is 
used, first make sure that the footwell 
behind the driver's seat is free of obstacles. 
Failure to do so could cause injury to persons or 
damage to objects as a result of a rearward 
movement of the seat.
<
The adjusting procedure is halted when you 
touch a seat adjustment switch or one of the 
memory buttons.
Activating/deactivating automatic call-
up
1.
Briefly press button
1 in the turn signal/high 
beam lever up or down repeatedly until the 
symbol appears in the display, accompa-
nied by the word "SET".
2.
Press button
2.
3.
Briefly press button
1 in the turn signal/high 
beam lever down repeatedly until the sym-
bol appears in the display.
4.
Press button
2.
5.
Use button 
1 to select:
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is 
opened.
>
Switch off automatic function.
6.
Press button
2.
The setting is stored.
Safety belts
Observe the adjustment instructions on 
page
 to ensure the best possible per-
sonal protection.
<
Before every drive, make sure that all occupants 
wear their safety belts. Airbags complement the 
safety belt as an additional safety device, but 
they do not represent a substitute.
Closing
Make sure you hear the latch plate engage in 
the belt buckle.
The upper belt anchor is suitable for adults of 
any stature as long as the seat is adjusted prop-
erly, refer to page
.
Opening
1.
Grasp the belt firmly.
2.
Press the red button in the buckle.
3.
Guide the belt into its reel.
Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG