BMW 2011 135i Coupe Manual Do Proprietário

58

1.

Switch on the ignition, refer to page

2.

Briefly press button

1 in the turn signal/high 

beam lever up or down repeatedly until the 
symbol appears in the display, accompa-
nied by the word "SET".

3.

Press button

2.

4.

Briefly press button

1 in the turn signal/high 

beam lever down repeatedly until the sym-
bol appears in the display.

5.

Press button

2.

6.

Use button 

1 to select:

>

Turn signals flash once.

>

Triple turn signal.

7.

Press button

2.

The setting is stored for the remote control 
currently in use.

1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or 

rain sensor

4 Cleaning windshield and headlamps

5 Setting speed for intermittent wipe, or sen-

sitivity of the rain sensor

Press the lever upward, arrow 

1.

The lever automatically returns to its initial posi-
tion when released.

Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.

Press twice or press beyond the resistance 
point. 
The system switches to normal speed when the 
vehicle is stationary.

If the car is not equipped with a rain sensor, the 
intermittent-wipe time is a preset.
If the car is equipped with a rain sensor, the time 
between wipes is controlled automatically and 
depends on the intensity of the rainfall. The rain 
sensor is mounted on the windshield, directly in 
front of the interior rearview mirror.

Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG