BMW 2010 Z4 sDrive30i Manual Do Proprietário

Página de 254
Practical interior accessories
100
Practical interior accessories
Integrated universal remote 
control*
The concept
The integrated universal remote control can 
replace as many as three hand-held transmit-
ters for various remote-controlled devices, 
such as garage doors and gates or lighting sys-
tems. The integrated universal remote control 
registers and stores signals from the original 
hand-held transmitters.
The signal of an original hand-held transmitter 
can be programmed on one of the three mem-
ory buttons
1. After this, the programmed 
memory button
1 will operate the system in 
question. The LED
2 flashes to confirm trans-
mission of the signal.
Should you sell your vehicle one day, be sure to 
delete the stored programs beforehand for your 
safety, refer to page
.
To prevent possible damage or injury, 
before programming or using the inte-
grated universal remote control, always inspect 
the immediate area to make certain that no peo-
ple, animals or objects are within the pivoting or 
travel range of the device being operated. Com-
ply also with the safety instructions supplied 
with the original hand-held transmitter.
<
Checking compatibility
If this symbol appears on the package 
or in the instructions supplied with the 
original hand-held transmitter, you can 
assume that the radio remote control device will 
be compatible with the integrated universal 
remote control.
For additional information, please contact your 
BMW center or call: 1-800-355-3515.
You can also obtain information on the 
Internet at: 
www.bmwusa.com or 
www.homelink.com. 
HomeLink is a registered trademark of Johnson 
Controls, Inc.
<
Programming
Memory buttons
LED
Fixed-code hand-held transmitters
1.
Switch on the ignition, refer to page
.
2.
When starting operation for the first time: 
press the left and right memory buttons
1 
for approx. 20 seconds until the LED
2 
flashes rapidly. The three memory buttons 
are cleared.
3.
Hold the original hand-held transmitter at a 
distance of approx. 4 to 12 in/10 to 30 cm 
from the memory buttons
1.
The required distance between the 
hand-held transmitter and the mem-
ory buttons
1 depends on the system of 
the respective original hand-held transmit-
ter used.
<
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG