BMW 2010 Z4 sDrive30i Manual Do Proprietário

Página de 254
 31
Confirmation signals
You can activate or deactivate the confirmation 
signals.
1.
"Settings"
2.
"Door locks"
3.
"Flash when lock/unlock"
4.
Press the controller.
 Flashing when locking/unlocking the vehi-
cle is switched on.
Malfunctions
The remote control may malfunction due to 
local radio waves. If this occurs, unlock and lock 
the car at the door lock with the integrated key.
If the car can no longer be locked with a remote 
control, the battery in the remote control is dis-
charged. Use the remote control on an 
extended trip to recharge the battery, refer to 
page
. The remote control for Comfort 
Access
*
 contains a battery that may have to be 
.
For US owners only
The transmitter and receiver units comply with 
part 15 of the FCC/Federal Communications 
Commission regulations. Operation is gov-
erned by the following:
FCC ID:
LX8766S 
LX8766E 
LX8CAS
Compliance statement: 
This device complies with part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions:
>
This device must not cause harmful inter-
ference, and
>
This device must accept any interference 
received, including interference that may 
cause undesired operation.
Any unauthorized modifications or 
changes to these devices could void the 
user's authority to operate this equipment.
<
Opening and closing:
Using the door lock
You can set the way in which the car is 
unlocked, refer to page
Convenient operation*
You can operate the windows and the retract-
able hardtop via the door lock.
Hold the key in the position for unlocking or 
locking.
During each closing procedure, and when 
opening the retractable hardtop, watch 
the process and ensure that no one becomes 
trapped. Releasing the key stops the 
operation.
<
Manual operation
In the event of an electrical malfunction, you can 
lock and unlock the driver's door by turning the 
integrated key to the corresponding limit posi-
tions in the door lock.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG