BMW 2010 Z4 sDrive30i Manual Do Proprietário

44

1.

Switch on radio readiness or the ignition, 
refer to page

.

2.

Adjust the seat and exterior mirrors to the 
desired positions.

3.

Press the 

 button.

The LED in the button lights up.

4.

Press the desired memory button 

1 or 2: the 

LED goes out.
The driver's seat and exterior mirror posi-
tions are stored for the remote control cur-
rently in use.

Do not call up memory while you are driv-
ing; otherwise, unexpected seat move-

ment could result in an accident.

<

1.

Unlock and open the driver's door or switch 
on radio readiness, refer to page

2.

Briefly press the desired memory 
button

1 or 2.

The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.

1.

Close the driver's door and switch the igni-
tion on or off, refer to page

2.

Press the desired memory button

1 or 2 

and keep it pressed until the adjustment 
process has been completed.

If the 

 button was pressed accidentally:

Press the button again; the LED goes out.

The driver's seat position last stored is stored 
for the remote control currently in use.
You can select whether the seat should be reset 
to that position.

When this Personal Profile function is 
used, first make sure that the footwell 

behind the driver's seat is free of obstacles. 
Failure to do so could result in damage to the 
objects if the seat were to move rearward.

<

The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.

1.

"Settings"

2.

"Door locks"

3.

"Last seat position automatic"

Observe the adjustment instructions on 
page

 to ensure the best possible per-

sonal protection.

<

Before every drive, make sure that all occupants 
wear their safety belts. Airbags complement the 
safety belt as an additional safety device, but 
they do not represent a substitute.

Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG