BMW 2010 Z4 sDrive30i Manual Do Proprietário

74

Press the button in the turn indicator lever.
Some Check Control messages are displayed 
until the malfunctions have been rectified. They 
cannot be hidden. If several malfunctions occur 
at the same time, they are displayed in suc-
cession.

They are marked with the symbol 
shown here.

Other messages are automatically hidden after 
approx. 20 seconds, but are kept in memory.

They are marked with the symbol 
shown here.

1.

Push button 

1 in the turn indicator lever up 

or down repeatedly until the appropriate 
symbol appears in the display, accompa-
nied by the words "CHECK CONTROL".

2.

Press button 

2.

"CHECK OK" appears if there are no Check 
Control messages.
If a Check Control message has been 
stored, the corresponding lamp comes on. 
It is accompanied by a text message on the 
Control Display.

3.

Push button 

1 to check for other messages.

4.

Press button 

2.

The display again shows the outside tem-
perature and the time.

1.

 Press the button.

2.

"Vehicle Info"

3.

"Vehicle status"

4.

"Check Control"

5.

Select the text message.

You can enter a speed, and a Check Control 
message will indicate when you reach this 
speed. This enables you, for example, to 
receive warnings if you exceed a speed limit in 
an urban area. 
You are not alerted to having reached this 
speed again until after your vehicle speed drops 
below it by at least 3 mph or 5 km/h.

1.

"Settings"

2.

"Speed"

3.

"Warning"

Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG