BMW 2010 Z4 sDrive30i Manual Do Proprietário

 91

The high-beam assistant cannot serve as 
a substitute for the driver's personal judg-

ment of when to use the high beams. Therefore, 
manually switch off the high beams in situations 
where this is required to avoid a safety risk.

<

The system is not fully functional in situations 
such as the following, and driver intervention 
may be necessary:

>

In very unfavorable weather conditions, 
such as fog or heavy precipitation

>

In detecting poorly-lit road users, such as 
pedestrians, cyclists, horseback riders and 
wagons; when driving close to train or ship 
traffic; and at animal crossings

>

In tight curves, on hilltops or in depressions, 
in cross traffic or half-obscured oncoming 
traffic on highways

>

In poorly lit towns and cities and in the pres-
ence of highly reflective signs

>

At low speeds

>

When the windshield in front of the interior 
rearview mirror is fogged over, dirty or cov-
ered with stickers, etc.

>

If the sensor is dirty. Clean the sensor on 
the front of the interior rearview mirror using 
a cloth moistened with a small amount of 
glass cleaner.

1.

"Settings"

2.

"Lighting"

3.

"High beam assistant"

 The high-beam assistant is activated and 

is stored for the remote control currently in use.

You can adjust the brightness of the instrument 
lighting only when the parking lamps or the low 
beams are switched on.

1.

Push button 

1 up or down repeatedly until 

the appropriate symbol appears in the dis-
play, accompanied by the brightness set-
ting and scale the word "SET".

2.

Press button 

2.

3.

Push button 

1 up or down to select the 

desired brightness level.

4.

Press button 

2.

The display again shows the outside tem-
perature and the time.

Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG