BMW 2011 328i Coupe Manual Do Proprietário

 53

Select this only when the vehicle is stationary. 
When the gearshift lever is pressed to the left, a 
slight resistance has to be overcome.

In addition to fully automatic operation, you can 
also manually shift with the Steptronic, refer to 
page

To prevent the vehicle from rolling, 
always select position P and apply the 

parking brake before leaving the vehicle with 
the engine running.

<

In order to remove the remote control from the 
ignition lock, you must first move the selector 
lever to position P and switch off the engine: 
interlock. Removing the remote control from 
the ignition lock, refer to page

P R N D M/S + –

The selector lever position is displayed and, in 
manual mode, the engaged gear, e.g. M4.

>

With the ignition switched on or the engine 
running, the selector lever can be moved 
out of position P.

>

Before moving the lever away from P or N 
with the vehicle stationary, first depress the 
brake; otherwise, the selector lever will 
refuse to move: shiftlock.

To prevent the vehicle from creeping 
after you select a driving position, 

depress the brake until you are ready to 
start.

<

A lock prevents you from inadvertently engag-
ing selector lever positions R and P. To cancel 
the lock, press the button on the front of the 
selector lever, see arrow.

Select this only when the vehicle is stationary. 
The rear wheels are locked.

Select this only when the vehicle is stationary.

You can select this in a car wash, for example. 
The vehicle can roll.

Position for normal vehicle operation. All for-
ward gears are selected automatically.
Under normal operating conditions, fuel con-
sumption is lowest when you are driving in posi-
tion D.

Kickdown enables you to achieve maximum 
performance. 
Press the accelerator pedal beyond the full-
throttle resistance point.

Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG