BMW 2011 740Li Sedan Manual Do Proprietário

When the ignition is switched off, refer to
page 

Select only when the vehicle is stationary. The
drive wheels are blocked.
P is engaged automatically:

▷

After the engine is switched off, if the car is
in radio ready state, refer to page 

, or if the

ignition is switched off, refer to page 

, and

if position R or D is engaged.

▷

If the ignition is switched off and position N
is engaged.

▷

If the safety belt is unbuckled, the driver's
door is opened, and the brake pedal is not
pressed while the vehicle is stationary and
transmission position R or D is engaged.

Kickdown is used to achieve maximum driving
performance. Press on the accelerator beyond
the resistance point at the full throttle position.

▷

Transmission position P can only be disen‐
gaged if the engine is running and the brake
pedal is pressed.

▷

With the vehicle stationary, press on the
brake pedal before shifting out of P or N;
otherwise, the shift command will not be
executed: shift lock.

Depress the brake until you start driv‐
ing

To prevent the vehicle from creeping after
you select a driving position, maintain pres‐
sure on the brake pedal until you are ready
to start.◀

Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its
center position.

Press the Unlock button to:

▷

Engage R.

▷

Shift out of P.

Press button P.

Seite 73

73

Online Edition for Part no. 01 40 2 606 497 - 03 11 490