BMW 2010 550i Sedan Manual Do Proprietário

Página de 271
 41
Opening, closing
Sliding visor
You can move the sliding visor independently 
with the sunroof closed or raised.
>
Slide the switch back to the resistance 
point. 
The sliding visor opens as long as you keep 
the switch in this position.
>
Briefly press the switch back beyond the 
resistance point. 
The sliding visor will open automatically. 
Briefly pressing the switch stops the 
motion.
You can close the sliding visor in a similar man-
ner by sliding the switch forwards.
Panorama glass sunroof
With the sliding visor open, proceed as 
described under Sliding visor.
For information on using Convenient opening 
and closing at the door lock or with the remote 
control, refer to page
 or
For information on comfort closing with Com-
fort Access, refer to page
.
Opening and closing sunroof and 
sliding visor together
Briefly press the switch beyond the resistance 
point twice consecutively.
Briefly pressing the switch stops the motion.
Comfort modes
>
Press the switch twice with the sunroof 
open: 
The sunroof is raised.
>
When the sunroof is raised, briefly press the 
switch twice in the opening direction: 
The sunroof is opened all the way.
Comfort position
The sunroof is not completely open in the com-
fort position. This reduces the wind noises in 
the interior.
Each time the panorama glass sunroof is com-
pletely opened or closed, it stops in the comfort 
position. If desired, continue the motion follow-
ing this with the switch.
Pinch protection system
If the panorama glass sunroof or sliding visor 
encounter resistance when closing from 
roughly one third of the sunroof opening or 
when closing from the raised position, the clos-
ing action is interrupted and the panorama 
glass sunroof and sliding visor reopen a little.
Despite the pinch protection system, 
inspect the sunroof's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as 
very thin objects, and the sunroof would con-
tinue closing.
<
Closing without pinch protection 
system
In case of danger from outside, slide the switch 
forward beyond the resistance point and hold. 
The roof closes without the pinch protection 
system.
Following interruptions in electrical 
power supply
After a power loss, the sunroof may only 
respond to the raise command. Then have the 
system initialized. BMW recommends having 
this work done by your BMW center.
Moving manually*
In the event of an electrical malfunction, you can 
move the sunroof manually.
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 602 678 - © 08/09 BMW AG