BMW 2010 550i Sedan Manual Do Proprietário

Adju

sting

The adjustment of the lumbar support is not
stored in the memory.

Storing

Switch on radio readiness or ignition, refer
to page

Set the desired seat, exterior mirror and
steering wheel positions.

Press the

button:

The LED in the button lights up.

Press the desired memory button

1 or 2:

The LED goes out.

Requesting

Do not request a position from the mem-
ory while the vehicle is moving. There is a

risk of accident from unexpected movement of
the seat or steering wheel.

Comfort mode

Open the driver's door after unlocking or
switch on radio readiness.

Briefly press the desired memory button

The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.

Safety feature

Close the driver's door and switch the igni-
tion on or off.

Press the desired memory button

1 or 2

and keep it pressed until the adjustment
process has been completed.

If the

button was pressed inadvertently:

press the button again; the LED goes out.

Requesting with remote control

The last positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in use.
You can choose when the position is requested:

Request when unlocking vehicle

Request when opening driver's door

When using this feature, always make
sure that the footwell behind the driver's

seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.

The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.

Selecting automatic call-up

iDrive, for operating principle refer to page

"Settings"

"Door locks"

"Last seat position auto."

The function for automatically calling up

the last seat position is switched on and is
stored for the remote control currently in use.

Switching off automatic call-up

Deactivate "Last seat position auto.".

Head restraints

A correctly adjusted head restraint reduces the
risk of spinal injury in the event of an accident.

Adjust the head restraint so that its center
is approximately at ear level. Otherwise

there is increased danger of injury in the event
of an accident. Only remove the head restraints
if no one will be sitting on the seat in question.
Reinstall the head restraints before transport-
ing passengers, as otherwise the head restraint
cannot provide its protective function.