BMW 2010 ActiveHybrid X6 Manual Do Proprietário

Driving

Drive readiness

With drive readiness activated, the vehicle is
ready to drive.
Switching on drive readiness corresponds to
starting the engine in conventional vehicles.
Drive readiness can take the following forms:

Electric driving
The combustion engine is not switched on.

Driving with combustion engine
The vehicle is driven by the combustion
engine.

Drive readiness in detail

Never leave the vehicle unattended with
drive readiness activated; such a vehicle

represents a potential safety hazard.

Activating drive readiness

Close the driver's door.

Insert the remote control as far as possible
into the ignition lock. With comfort access

place the remote control into the vehicle,
refer to BMW X6 Owner's Manual.

Depress brake pedal.

To initialize the brake system, the
brake pedal travel is longer than usual

during activation of drive readiness. After
the brake pedal is released, the pedal travel
returns to normal.

Press the Start/Stop button.

Drive readiness is active:

Starting the combustion engine

or electric drive readiness, silent start:
The tachometer pointer moves into the
READY position.

Electric drive readiness can be acti-
vated within an interval of approx. 2 to

60 seconds after radio readiness is
switched on, provided that the function
conditions for electric driving have been
met, refer to page

Electric drive readiness, silent start

The vehicle is ready to drive without starting the
combustion engine.
Silent start, the noiseless starting of the vehicle,
can be activated within an interval of approx. 2
to 60 seconds after radio readiness is switched
on, under the following conditions:

driver's door closed

conditions met to allow electric driving,
refer to page

During electric driving, please note that
pedestrians and other road users may fail

to notice the vehicle in the usual way due to the
lack of engine noise. For example, proceed with
particular caution when pulling into and out of a
parking space.

Starting the combustion engine

When drive readiness is switched on under the
following circumstances, the combustion
engine is started:

drive system not at operating temperature

high temperature of hybrid system

insufficient charge state of high-voltage
battery or fully charged high-voltage battery

If a Silent start is not possible:
Avoid frequent starting of the combustion

engine in quick succession or repeated starting
attempts in which the engine does not start.
Otherwise, the fuel is not burned or inade-
quately burned and there is a danger of over-
heating and damaging the catalytic converter.