BMW 2010 ActiveHybrid X6 Manual Do Proprietário

Things

to re

memb

er when

driving

Things to remember when driving

Break-in period

Moving parts need breaking-in time to adjust to
each other. To ensure that your vehicle contin-
ues to provide optimized economy of operation
throughout an extended service life, we request
that you devote careful attention to the follow-
ing section.

Engine and rear axle differential

Always obey all official speed limits.

Up to 1,200 miles/2,000 km

Drive at various engine and vehicle speeds, but
do not exceed:

4,500 rpm or 100 mph/160 km/h

Avoid full-throttle operation and use of the
transmission's kick-down mode during these
initial miles.

From 1,200 miles/2,000 km

The engine and vehicle speed can gradually be
increased.

Brake system

Brakes require an initial break-in period of
approx. 300 miles/500 km to achieve optimized
contact and wear patterns between brake pads
and rotors. Drive in a reserved manner during
this break-in period.

Following part replacement

Observe the break-in instructions again if com-
ponents mentioned above must be replaced
after subsequent driving operation.

Saving fuel

The fuel consumption of your vehicle depends
on various factors. Through a few simple steps,
your driving style, and regular maintenance, you
can have a positive influence on your fuel con-
sumption and environmental impact.

Removing unnecessary cargo

Additional weight increases fuel consumption.

Removing add-on parts after use

Remove unneeded auxiliary mirrors, roof or rear
luggage racks after use. Add-on parts attached
to the vehicle impede the aerodynamics and
increase the fuel consumption.

Closing windows and glass sunroof*

An open glass sunroof or window likewise
increases air resistance and thus fuel consump-
tion.

Checking tire inflation pressures

regularly

Check and correct the tire inflation pressure as
needed at least twice a month and before long
trips.
An insufficient tire inflation pressure increases
the rolling resistance and thus increases the
fuel consumption and tire wear.

Driving off immediately

Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, begin to drive at a moderate engine
speed. This is the fastest way for the cold
engine to reach its operating temperature.

Thinking ahead when driving

Avoid unnecessary acceleration and braking.
To do so, maintain the appropriate distance
from the vehicle in front of you. An anticipatory
and smooth driving style reduces fuel con-
sumption.

Avoiding high engine speeds

Driving at a low engine speed reduces fuel con-
sumption and minimizes wear.