BMW 2010 M3 Coupe Manual Do Proprietário

riv

g ti

uni

iga

lity

"Welcome light"

Welcome lamps are activated and are

stored for the remote control currently in use.

Pathway lighting

If you activate the headlamp flasher after
switching off the ignition with the lamps
switched off, the low beams come on and
remain on for a certain time.

Setting the duration or deactivating

"Settings"

"Lighting"

"Pathway light.:"

Set a time of duration, or 0 s to deactivate
the function.

The setting is stored for the remote control cur-
rently in use.

Daytime running lights

The daytime running lights light up in switch
positions

0, 1 and 3.

Activating/deactivating daytime
running lights

"Settings"

"Lighting"

"Daytime running lamps"

Daytime running lights are activated and

are stored for the remote control currently in
use.

Adaptive light control*

The concept

Adaptive light control is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.

Activating Adaptive Light Control

With the ignition switched on, turn the light
switch to position

3, refer to page

Standstill function

: to avoid blinding oncoming

traffic, the adaptive light control directs light
towards the front passenger side when the
vehicle is at a standstill.
Adaptive light control is not active when revers-
ing.

Malfunction

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive light control is
malfunctioning or has failed. Have the system
checked as soon as possible.