BMW 2009 M5 Sedan Manual Do Proprietário
Adjusting
46
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off.
tion on or off.
2.
Press the desired memory button
1 or 2
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Requesting with remote control
The last positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in use.
You can choose when the position is requested:
rior rearview mirrors, and steering wheel are
stored for the remote control currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for operating principle refer to page
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for operating principle refer to page
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
troller.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
controller until "Door locks" is selected and
press the controller.
6.
Select "Central locking" and press the con-
troller.
troller.
7.
Select "Last seat pos." and press the con-
troller.
troller.
8.
Select "After unlocking" or "After door
opened".
opened".
9.
Press the controller.
To cancel the request:
Select "Deactivated" and press the controller.
Select "Deactivated" and press the controller.
Head restraints
A correctly adjusted head restraint reduces the
risk of spinal injury in the event of an accident.
risk of spinal injury in the event of an accident.
Adjust the head restraint so that its center
is approximately at ear level. Otherwise
is approximately at ear level. Otherwise
there is increased danger of injury in the event
of an accident. Only remove the head restraints
if no one will be sitting on the seat in question.
Reinstall the head restraints before transport-
ing passengers, as otherwise the head restraint
cannot provide its protective function.
of an accident. Only remove the head restraints
if no one will be sitting on the seat in question.
Reinstall the head restraints before transport-
ing passengers, as otherwise the head restraint
cannot provide its protective function.
<
Active front head restraints
In the event of a rear-end collision of sufficient
severity, the active head restraint reduces the
distance to the head.
severity, the active head restraint reduces the
distance to the head.
Do not use seat covers or head restraint
covers that could impede the proper
covers that could impede the proper
functioning of the active head restraint. Other-
wise, there is no assurance that the active head
restraint will perform its protective function and
it is not possible to take advantage of its injury-
reducing potential in the event of a rear-end
collision.
Have the active head restraints reset after they
wise, there is no assurance that the active head
restraint will perform its protective function and
it is not possible to take advantage of its injury-
reducing potential in the event of a rear-end
collision.
Have the active head restraints reset after they
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG