BMW 2009 M5 Sedan Manual Do Proprietário

 49

the Control Display with buttons

2 and 3. The 

maximum temperature is supplied when three 
LEDs are lit.
The temperature is reduced and if need be, the 
heating is switched off in order to reduce the 
load on the battery. The LEDs remain lit.
To switch off: Press button longer.

The heat output can be distributed variously in 
the seat cushion and the backrest.
iDrive, for operating principle refer to page

1.

Open the start menu.

2.

Move the controller to the left to open "Cli-
mate".

3.

Select "Seat heater distribution" and press 
the controller.

4.

Move the controller to the left or right to 
select "Driver" or "Passenger".

5.

Turn the controller to adjust the distribu-
tion.
The setting is applied.

The heat output can be distributed variously in 
the seat cushion and the backrest.
iDrive, for operating principle refer to page

1.

Open the start menu.

2.

Move the controller to the left to open "Cli-
mate".

3.

Select "Driver's seat climate" or "Passen-
ger's seat climate" and press the controller.

Turn the controller to adjust the distribution.
The setting is applied.

Operation similar to front seat heating; two tem-
perature levels, without temperature distribu-
tion.

The appearance and arrangement of the but-
tons may vary depending on the equipment.

1 Active seat ventilation
2 Active seat ventilation with seat heating

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG