BMW 2009 M3 Sedan Manual Do Proprietário
Replacing components
206
Lamps in the luggage compartment lid
1.
Take the warning triangle out of its holder,
refer to page
refer to page
. Unscrew the holder using
the screwdriver from the onboard tool kit.
2.
Pry out the fastening plugs in the trim of the
luggage compartment lid using a screw-
driver and remove the trim.
luggage compartment lid using a screw-
driver and remove the trim.
3.
Unfasten the bulb holder at the clip, see
arrow, and remove.
arrow, and remove.
4.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
turning it to the left for removal and replace-
ment.
5.
Re-engage the bulb holder so that it audibly
clicks into place.
clicks into place.
6.
Reattach the trim of the luggage compart-
ment lid and the holder for the warning tri-
angle.
ment lid and the holder for the warning tri-
angle.
License plate lamp, center brake lamp,
parking/tail lamp and turn signal*
These lamps use LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Repairing a flat tire with the
M Mobility System
To repair a flat tire, your BMW M3 includes an
M Mobility System. With this system you can
apply a sealant to the inside of the tire to seal
the damaged section, restore the tire inflation
pressure and continue on your trip.
M Mobility System. With this system you can
apply a sealant to the inside of the tire to seal
the damaged section, restore the tire inflation
pressure and continue on your trip.
Safety measures in the event of a flat tire:
Park the vehicle as far away from moving
Park the vehicle as far away from moving
traffic as possible and on a firm surface. Switch
on the hazard warning flashers.
Apply the parking brake and engage first gear
or reverse. Have all occupants leave the vehicle
and move beyond the danger zone, e.g. behind
the guard rails.
If necessary, erect a warning triangle
on the hazard warning flashers.
Apply the parking brake and engage first gear
or reverse. Have all occupants leave the vehicle
and move beyond the danger zone, e.g. behind
the guard rails.
If necessary, erect a warning triangle
*
or warn-
ing flasher
*
at a suitable distance. Adhere to
country-specific regulations.
<
Preparations
The M Mobility System is located in the cargo
bay under the floor board.
If possible, leave any foreign bodies that have
penetrated the tire in place.
bay under the floor board.
If possible, leave any foreign bodies that have
penetrated the tire in place.
Instructions on how to use the M Mobility
System can also be found on the device
System can also be found on the device
itself.
<
Before using the M Mobility System, fol-
low the instructions on the sealant bot-
low the instructions on the sealant bot-
tle.
<
Remove the label with the speed restriction
from the sealant bottle and apply it to the steer-
ing wheel.
from the sealant bottle and apply it to the steer-
ing wheel.
Please note the expiry date on the sealant
bottle.
bottle.
<
ba8_E90M3_cic.book Seite 206 Dienstag, 19. August 2008 11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG