BMW 2009 M3 Sedan Manual Do Proprietário
45
The indicator lamp in the instrument
cluster comes on. The settings made
on the Control Display for the functions
cluster comes on. The settings made
on the Control Display for the functions
in MDrive are active.
Pressing the button again deactivates MDrive.
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
ton was pressed, MDrive was unable to
respond because the Antilock Brake System
ABS or Dynamic Stability Control DSC are cur-
rently regulating driving stability. Press the
ABS or Dynamic Stability Control DSC are cur-
rently regulating driving stability. Press the
button again when the indicator lamp is no
longer flashing.
<
You can change individual settings outside of
MDrive even when MDrive is activated, e.g.
using the buttons on the center console. To
reactivate all settings made on the Control Dis-
play for MDrive: press the button twice.
MDrive even when MDrive is activated, e.g.
using the buttons on the center console. To
reactivate all settings made on the Control Dis-
play for MDrive: press the button twice.
Resetting the settings
You can reset all MDrive settings to their default
values:
values:
1.
"Settings"
2.
"MDrive"
3.
Move the controller to the right repeatedly
until the "Options" menu is selected.
until the "Options" menu is selected.
4.
"Reset"
5.
"Yes"
M Key settings
For the remote control currently in use, you can
set your preferred program for the M Engine
Dynamics Control, the Electronic Damper Con-
trol EDC and the Shift Lights. These preset-
tings are called up when the engine is started.
set your preferred program for the M Engine
Dynamics Control, the Electronic Damper Con-
trol EDC and the Shift Lights. These preset-
tings are called up when the engine is started.
1.
"Settings"
2.
"MDrive"
3.
Move the controller to the right repeatedly
until the "Options" menu is selected.
The available functions are displayed:
until the "Options" menu is selected.
The available functions are displayed:
>
"POWER:"
M Engine Dynamics Control programs,
refer to page
M Engine Dynamics Control programs,
refer to page
>
"EDC:"
Electronic Damper Control
Electronic Damper Control
*
programs,
refer to page
>
"Shift lights:"
Shift Lights, refer to page
Shift Lights, refer to page
4.
Select the desired function.
5.
Select the desired setting.
The setting is stored for the remote control cur-
rently in use.
rently in use.
ba8_E90M3_cic.book Seite 45 Dienstag, 19. August 2008 11:51 11
Online Edition for Part no. 01 41 2 600 934 - © 08/08 BMW AG