BMW 2009 Z4 sDrive30i Manual Do Proprietário
Everything under control
74
Hiding Check Control messages
Press the button in the turn indicator lever.
Some Check Control messages are displayed
until the malfunctions have been rectified. They
cannot be hidden. If several malfunctions
occur at the same time, they are displayed in
succession.
Some Check Control messages are displayed
until the malfunctions have been rectified. They
cannot be hidden. If several malfunctions
occur at the same time, they are displayed in
succession.
They are marked with the symbol
shown here.
shown here.
Other messages are automatically hidden after
approx. 20 seconds, but are kept in memory.
approx. 20 seconds, but are kept in memory.
They are marked with the symbol
shown here.
shown here.
Viewing stored Check Control
messages
messages
1.
Press button
1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the words "CHECK CONTROL".
symbol appears in the display, accompa-
nied by the words "CHECK CONTROL".
2.
Press button
2.
"CHECK OK" appears if there are no Check
Control messages.
If a Check Control message has been
stored, the corresponding lamp comes on.
It is accompanied by a text message on the
Control Display.
Control messages.
If a Check Control message has been
stored, the corresponding lamp comes on.
It is accompanied by a text message on the
Control Display.
3.
Press button
1 to check for other mes-
sages.
4.
Press button
2.
The display again shows the outside tem-
perature and the time.
perature and the time.
Displaying stored Check Control
messages
messages
iDrive, for operating principle refer to page
1.
Press the button.
2.
"Vehicle Info"
3.
"Vehicle status"
4.
"Check Control"
5.
Select the text message.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are not alerted to having reached this
speed again until after your vehicle speed drops
below it by at least 3 mph or 5 km/h.
iDrive, for operating principle refer to page
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are not alerted to having reached this
speed again until after your vehicle speed drops
below it by at least 3 mph or 5 km/h.
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG